This is a brief and informal document targeted to those who want to deal with the MPEG format. If you are one of them, you probably already know what is MPEG audio. If not, jump to http://www.mp3.com/ or http://www.layer3.org/ where you will find more details and also more links. This document does not cover compression and decompression algorithm.
NOTE: You cannot just search the Internet and find the MPEG audio specs. It is copyrighted and you will have to pay quite a bit to get the Paper. That's why I made this. Information I got is gathered from the Internet, and mostly originate from program sources I found available for free. Despite my intention to always specify the information sources, I am not able to do it this time. Sorry, I did not maintain the list. :-(
These are not a decoding specs, it just informs you how to read the MPEG headers and the MPEG TAG. MPEG Version 1, 2 and 2.5 and Layer I, II and III are supported, the MP3 TAG (ID3v1 and ID3v1.1) also.. Those of you who use Delphi may find MPGTools Delphi unit (freeware source) useful, it is where I implemented this stuff.
I do not claim information presented in this document is accurate. At first I just gathered it from different sources. It was not an easy task but I needed it. Later, I received lots of comments as feedback when I published this document. I think this last release is highly accurate due to comments and corrections I received.
This document is last updated on December 22, 1999.
MPEG Audio Compression Basics
This is one of many methods to compress audio in digital form trying to consume as little space as possible but keep audio quality as good as possible. MPEG compression showed up as one of the best achievements in this area.
This is a lossy compression, which means, you will certainly loose some audio information when you use this compression methods. But, this lost can hardly be noticed because the compression method tries to control it. By using several quite complicate and demanding mathematical algorithms it will only loose those parts of sound that are hard to be heard even in the original form. This leaves more space for information that is important. This way you can compress audio up to 12 times (you may choose compression ratio) which is really significant. Due to its quality MPEG audio became very popular.
MPEG standards MPEG-1, MPEG-2 and MPEG-4 are known but this document covers first two of them. There is an unofficial MPEG-2.5 which is rarely used. It is also covered.
MPEG-1 audio (described in ISO/IEC 11172-3) describes three Layers of audio coding with the following properties:
Each layer has its merits.
MPEG-2 audio (described in ISO/IEC 13818-3) has two extensions to MPEG-1, usually referred as MPEG-2/LSF and MPEG-2/Multichannel.
MPEG-2/LSF has the following properties:
MPEG-2/Multichannel has the following properties:
MPEG Audio Frame Header
An MPEG audio file is built up from smaller parts called frames. Generally, frames are independent items. Each frame has its own header and audio informations. There is no file header. Therefore, you can cut any part of MPEG file and play it correctly (this should be done on frame boundaries but most applications will handle incorrect headers). For Layer III, this is not 100% correct. Due to internal data organization in MPEG version 1 Layer III files, frames are often dependent of each other and they cannot be cut off just like that.
When you want to read info about an MPEG file, it is usually enough to find the first frame, read its header and assume that the other frames are the same This may not be always the case. Variable bitrate MPEG files may use so called bitrate switching, which means that bitrate changes according to the content of each frame. This way lower bitrates may be used in frames where it will not reduce sound quality. This allows making better compression while keeping high quality of sound.
The frame header is constituted by the very first four bytes (32bits) in a frame. The first eleven bits (or first twelve bits, see below about frame sync) of a frame header are always set and they are called "frame sync". Therefore, you can search through the file for the first occurence of frame sync (meaning that you have to find a byte with a value of 255, and followed by a byte with its three (or four) most significant bits set). Then you read the whole header and check if the values are correct. You will see in the following table the exact meaning of each bit in the header, and which values may be checked for validity. Each value that is specified as reserved, invalid, bad, or not allowed should indicate an invalid header. Remember, this is not enough, frame sync can be easily (and very frequently) found in any binary file. Also it is likely that MPEG file contains garbage on it's beginning which also may contain false sync. Thus, you have to check two or more frames in a row to assure you are really dealing with MPEG audio file.
Frames may have a CRC check. The CRC is 16 bits long and, if it exists, it follows the frame header. After the CRC comes the audio data. You may calculate the length of the frame and use it if you need to read other headers too or just want to calculate the CRC of the frame, to compare it with the one you read from the file. This is actually a very good method to check the MPEG header validity.
Here is "graphical" presentation of the header content. Characters from A to M are used to indicate different fields. In the table, you can see details about the content of each field.
AAAAAAAA AAABBCCD EEEEFFGH IIJJKLMM
|A||11||(31-21)||Frame sync (all bits set)|
|B||2||(20,19)||MPEG Audio version ID|
00 - MPEG Version 2.5
01 - reserved
10 - MPEG Version 2 (ISO/IEC 13818-3)
11 - MPEG Version 1 (ISO/IEC 11172-3)
Note: MPEG Version 2.5 is not official standard. Bit No 20 in frame header is used to indicate version 2.5. Applications that do not support this MPEG version expect this bit always to be set, meaning that frame sync (A) is twelve bits long, not eleve as stated here. Accordingly, B is one bit long (represents only bit No 19). I recommend using methodology presented here, since this allows you to distinguish all three versions and keep full compatibility.
00 - reserved
01 - Layer III
10 - Layer II
11 - Layer I
0 - Protected by CRC (16bit crc follows header)
1 - Not protected
NOTES: All values are in kbps
MPEG files may have variable bitrate (VBR). This means that bitrate in the file may change. I have learned about two used methods:
More about VBR you may find on Xing Tech site
For Layer II there are some combinations of bitrate and mode which are not allowed. Here is a list of allowed combinations.
|F||2||(11,10)||Sampling rate frequency index (values are in Hz)
0 - frame is not padded
1 - frame is padded with one extra slot
Padding is used to fit the bit rates exactly. For an example: 128k 44.1kHz layer II uses a lot of 418 bytes and some of 417 bytes long frames to get the exact 128k bitrate. For Layer I slot is 32 bits long, for Layer II and Layer III slot is 8 bits long.
How to calculate frame length
First, let's distinguish two terms frame size and frame length. Frame size is the number of samples contained in a frame. It is constant and always 384 samples for Layer I and 1152 samples for Layer II and Layer III. Frame length is length of a frame when compressed. It is calculated in slots. One slot is 4 bytes long for Layer I, and one byte long for Layer II and Layer III. When you are reading MPEG file you must calculate this to be able to find each consecutive frame. Remember, frame length may change from frame to frame due to padding or bitrate switching.
Read the BitRate, SampleRate and Padding of the frame header.
For Layer I files us this formula:
FrameLengthInBytes = (12 * BitRate / SampleRate + Padding) * 4
For Layer II & III files use this formula:
FrameLengthInBytes = 144 * BitRate / SampleRate + Padding
|H||1||(8)||Private bit. It may be freely used for specific needs of an application, i.e. if it has to trigger some application specific events.|
00 - Stereo
01 - Joint stereo (Stereo)
10 - Dual channel (Stereo)
11 - Single channel (Mono)
|J||2||(5,4)||Mode extension (Only if Joint stereo)
Mode extension is used to join informations that are of no use for stereo effect, thus reducing needed resources. These bits are dynamically determined by an encoder in Joint stereo mode.
Complete frequency range of MPEG file is divided in subbands There are 32 subbands. For Layer I & II these two bits determine frequency range (bands) where intensity stereo is applied. For Layer III these two bits determine which type of joint stereo is used (intensity stereo or m/s stereo). Frequency range is determined within decompression algorythm.
0 - Audio is not copyrighted
1 - Audio is copyrighted
0 - Copy of original media
1 - Original media
00 - none
01 - 50/15 ms
10 - reserved
11 - CCIT J.17
MPEG Audio Tag ID3v1
The TAG is used to describe the MPEG Audio file. It contains information about artist, title, album, publishing year and genre. There is some extra space for comments. It is exactly 128 bytes long and is located at very end of the audio data. You can get it by reading the last 128 bytes of the MPEG audio file.
AAABBBBB BBBBBBBB BBBBBBBB BBBBBBBB
BCCCCCCC CCCCCCCC CCCCCCCC CCCCCCCD
DDDDDDDD DDDDDDDD DDDDDDDD DDDDDEEE
EFFFFFFF FFFFFFFF FFFFFFFF FFFFFFFG
|A||3||(0-2)||Tag identification. Must contain 'TAG' if tag exists and is correct.|
The specification asks for all fields to be padded with null character (ASCII 0). However, not all applications respect this (an example is WinAmp which pads fields with <space>, ASCII 32).
There is a small change proposed in ID3v1.1 structure. The last byte of the Comment field may be used to specify the track number of a song in an album. It should contain a null character (ASCII 0) if the information is unknown.
Genre is a numeric field which may have one of the following values:
|1||'Classic Rock'||21||'Ska'||41||'Bass'||61||'Christian Rap'|
|6||'Grunge'||26||'Ambient'||46||'Instrumental Pop'||66||'New Wave'|
|18||'Techno'||38||'Gospel'||58||'Cult'||78||'Rock & Roll'|
WinAmp expanded this table with next codes:
|80||'Folk'||92||'Progressive Rock'||104||'Chamber Music'||116||'Ballad'|
|81||'Folk-Rock'||93||'Psychedelic Rock'||105||'Sonata'||117||'Poweer Ballad'|
|82||'National Folk'||94||'Symphonic Rock'||106||'Symphony'||118||'Rhytmic Soul'|
|83||'Swing'||95||'Slow Rock'||107||'Booty Brass'||119||'Freestyle'|
|84||'Fast Fusion'||96||'Big Band'||108||'Primus'||120||'Duet'|
|85||'Bebob'||97||'Chorus'||109||'Porn Groove'||121||'Punk Rock'|
|86||'Latin'||98||'Easy Listening'||110||'Satire'||122||'Drum Solo'|
|87||'Revival'||99||'Acoustic'||111||'Slow Jam'||123||'A Capela'|
|Any other value should be considered as 'Unknown'|
MPEG Audio Tag ID3v2
This is new proposed TAG format which is different than ID3v1 and ID3v1.1. Complete tech specs for it may be found at http://www.id3.org/.
Created on September 1998. by Predrag Supurovic.
Thanks to Jean for debugging and polishing of this document, Peter Luijer, Guwani, Rob Leslie and Franc Zijderveld
for valuable comments and corrections.
© 1998, 1999 Copyright by DataVoyage
This document may be changed. Check http://www.dv.co.yu/mpgscript/mpeghdr.htm for updates.
You may use it freely. Distribution is allowed only in unaltered form. If you can help me make it more accurate, please do.
출처 : mpgedit.org
|Flash로 채팅을 구현해보자!! (22)||2009.08.11|
|Flash로 p2p를 만들어보자 - Stratus 라이브러리 (10)||2009.08.11|
|[AIR] ID3V2.4 Structure (0)||2008.01.22|
|[AIR] MPEG Audio Frame Header (0)||2008.01.22|
|[AIR] MPEG2 사운드 디코딩에 필요한 자료. ISO 11172-3 문서 (1)||2008.01.22|
|[AIR] Flash File Format Specifications (0)||2008.01.22|